Northeast Implement
Products
Check Our Our Other Brands!
SplitMaster 30
The professional horizontal splitter with maximum power for longer billets.
The SplitMaster 30 for large volumes of wood. With a splitting power of 30 t, the horizontal splitter copes with almost every log. The log lifting device and the optimum working height ensure ergonomic working. The Easy splitting knife is available as an option – firewood processing at its easiest, most ergonomic and most efficient.
33 t
splitting power max.
Autospeed functionality Max. billet length 49.21 in, cylinder stroke 51.18 in  Up to 8 billets per work cycle  Splitting knife for 4 parts suitable for log diameters 0-20 in as standard
Timber support table Ergonomic splitting table height 31.5 in E-motor: Motor circuit breaker and phase inverter Tractor drive: Universal joint shaft required, three-point linkage cat. I + II
49.21 in
billet length max.
9.84 in/s
splitting & return speed max.
SplitMaster 30 Overview
SplitMaster 30 Technical Information
Note: All measurements were converted from Metric into Imperial/English units of measurements. Therefore most measurements are an approximation.
SplitMaster 30 Drive Type
Article No.
Type
Propulsion
Weight lbs.
M8460H
M8455H
E15D
E7,5D
2597
2500
7.5 kW E-motor 400V, S6, CEE 16A, double-stage pump
Forward level in/s
Return in/s
3.54 - 7.1
3.15 - 6.3
7.1
6.3
Special equipment
Article No.
Description
C
FW
Oil cooler
Radio-controlled rope winch, pulling power 2204.62 lbs, rope 40 m. Can only be used with PTO operation with max. 540 rpm, cannot be used with PZGE machines in e-mode! 3,300.00
15 kW E-motor 400V, S6, CEE 32A, double-stage pump
M8450SH
PZG
2491.22
5.12 - 9.84
10.24
Tractor, power consumption 18–37 kW at 300–650 rpm, built- in oil pump with max. capacity 87 l/min
Accessory equipment
Article No.
Description
F0002605
F0003747
Chain for cable puller, 1 m, 2-log hauling hook for 2204.62 lbs
Gripping pliers for cable puller for log diameters up to 31.5 in, approx. 32 lbs
L
Y
Surcharge for large timber support table 55 × 79 in, weight approx. 154 lbs.  Not possible in combination with "Easy" splitting knife (Y)!
Surcharge SplitMaster with "Easy" splitting knife and lumber pick (no splitting knife for 4 parts)
F0003746
F0002179
Gripping pliers for cable puller, for log diameters up to 25.59 in, approx. 19.84 lbs
Hour counter for machines with E-drive
F0001806
Hour counter for machines with Z-drive, with speed display
F0003120
F0002027
Knife changing device
Light unit, push-on
DT
Tractor transverse chassis SplitMaster 26/30, max. 6.21 mph without brakes, drawbar eye. Not for use on public roads, only for use on private premises (e.g. lumberyards). No lights
Splitting knife "Easy" with lumber pick
Transverse chassis for SplitMaster
F0003383
F0003181
Separator plate between splitting trough and timber support (F0003181) and splitting trough extension for short timber (F0003121), not possible for DT
Separator plate between splitting trough and timber support, not possible for DT
F0003141
F0003074
Splitting knife "Easy" with lumber pick
Splitting knife for 2 parts
F0003075
Splitting knife for 4 parts (Ø 0–20 in), standard
F0003044
F0003069
Splitting knife for 6 parts (Ø 6-20 in)
Splitting knife for 8 parts (Ø 6-20 in)
F0003121
Splitting trough extension for splitting short timber
M8470SH
PZG-E15D
2702.87
M8465SH
PZG-E7.5D
2621.3
5.12 - 9.84 3.15 - 6.3
•	10.24 •	6.3
• Tractor • 7.5 kW E-motor 400V, S6, CEE 16A, double-stage pump
• Tractor • 15 kW E-motor 400V, S6, CEE 32A, double-stage pump
5.12 - 9.84 3.54 - 7.1
•	10.24 •	7.1
Z2000653
Universal PTO shaft
Z2000649
Universal PTO shaft for transverse tractor chassis DT
Copyright © 2016 Northeast Implement
Northeast         Implement
&
Top
Overview
Parts & Options