Northeast Implement
Products
Check Our Our Other Brands!
SpaltFix S-280
The compact split cutter
 Cuts and splits logs up to Ø 11 inch in 2, 4 or 6 parts. The optional lifting device easily lifts the logs on the timber support table. The hydraulic timber feed transports the timber to the circular saw blade via the conveyor belt. The finished billets are directly transported to loading via a conveyor belt.
11 t
splitting power max.
Log diameter max. 11 in Splitting power 11 t with Autospeed WIDIA circular saw blade Ø 27.5 in 6 billets of a length of up to 20 in per work cycle
Hydraulic log feed with 6.5 ft-long conveyor belt Manually activated saw advance Splitting knife adjustment manual Manual log down holder Three-point linkage cat. II
11 in
Log ∅ max.
13.39 | 12.2 in/s
splitting speed| return speed max.
SpaltFix S-280 Overview
SpaltFix S-280 Parts and Options
Note: All measurements were converted from Metric into Imperial/English units of measurements. Therefore most measurements are an approximation.
SpaltFix S-280 Drive Type
Article No.
Type
Propulsion
Weight lbs.
M3657
M3677
Z Turbo
ZE15 Turbo
1951
2645.55
• Tractor • 15 kW E-motor 400V, S6, CEE 32A
Conveyor Belts
Article No.
Description
F15
Reduced price for single-part ejector belt 5 ft, hydraulic drive, max. ejection height 3.6 ft
Tractor, power consumption 15 kW, built-in oil pump with capacity 49/103 l/min at 480 rpm
Chain Conveyor
Article No.
Description
F0002227
F0002594
Hydraulic chain conveyor 2
Hydraulic roller conveyor 3
F0002228
F0002334
Hydraulic chain conveyor 3
Hydraulic roller conveyor 4
Ejection Height max. m
Weight lbs.
1.1
507.063
F0
Reduced price in case of preparation for conveyor belt installation (valve block and hydraulic piping)
462.97
F0002229
Hydraulic chain conveyor 4
A m
2
3
3
4
4
Splitting Knife
Article No.
Description
F0001917
Splitting knife for 4 parts (for log Ø 0–11 in)
Weight lbs.
41.89
F0001916
Splitting knife for 6 parts (for log Ø 3.94–11 in)
48.5
Cross Conveyor
Article No.
Description
F0002141
Cross conveyor 10 ft – 10 × 7 ft for roller conveyor 4
Number of Chains
3
F0002166
Cross conveyor 10 ft – 10 × 10.5 m for roller conveyor 4
3
F0002167
Cross conveyor 10 ft – 10 × 13.8 m for roller conveyor 4
3
C m
4.6 | 4.6
4.6 | 4.6
4.6 | 4.6
B m
7
10.5
10.8
Log Length max. ft
10 - 13
10 - 13
10 - 13
Special Equipment
Article No.
Description
P
Hydraulic package for attaching longitudinal and cross conveyor or timber support stand (incl. art. no. H)
H
Hydraulic package for attaching timber support stand with log lifting device
A
Longitudinal stop with optional ventilation
Spare Parts
Article No.
Description
F0002769
Infeed belt
F0003124
Service kit (1,000 h): Set of footrests and filter element
Accessory Equipment
Article No.
Description
F0002137
Chip extraction connection Ø 3.94 in
F0002251
Hour counter for Z-, ZE-drive (Reed-contact)
F0001914
Lights unit, push-on
F0001904
Log support with lifting device incl. load-holding valve for max. 79 in timber length and Ø 11.8 (article no. H required)
Z2000637
Walterscheid W-Line universal joint shaft
Conveying System
Article No.
Description
F0002259
Chain conveyor 6.5 ft + cross conveyor 7 ft
F0002260
Chain conveyor 6.5 ft + cross conveyor 10.5 ft
F0002258
Chain conveyor 6.5 ft+ cross conveyor 10.5 ft
B
Installation of the cross conveyor on the operator's side
F0002235
Chain conveyor 6.5 ft + cross conveyor 13.8 ft
F0002257
Chain conveyor 6.5 ft + cross conveyor  7 ft
F0002261
Chain conveyor 6.5 ft + cross conveyor 13.8 ft
F0002236
Chain conveyor 10 ft + cross conveyor 10.5 ft
F0002225
Chain conveyor 10 ft + cross conveyor 7 ft
F0002262
Chain conveyor 10 ft + cross conveyor 13.8 ft
F0002264
Chain conveyor 13 ft + cross conveyor 13.8 ft
F0002263
Chain conveyor 13 ft + cross conveyor 10.5 ft
F0002238
Chain conveyor 13 ft + cross conveyor  7 ft
Number of Chains
3
3
2
C ft
8.2 | 8.2
2.5 | 2.5
5
B ft
7
10.5
10.5
A ft
6.5
6.5
6.5
Log Length max. ft
6.5 - 8
6.5 - 8
6.5 - 8
6.5 - 8
6.5 - 8
6.5 - 8
10 - 11.5
10 - 11.5
10 - 11.5
13 - 16
13 - 16
13 - 16
6.5
6.5
6.5
10
10
10
13
13
13
13.8
7
13.8
10.5
7
13.8
13.8
10.5
7
5
5
2.5 | 2.5
4 | 4
4 | 4
4 | 4
4 | 4 | 4
4 | 4 | 4
4 | 4 | 4
2
2
3
3
3
3
4
4
4
Copyright © 2016 Northeast Implement
Northeast         Implement
&
Top
Overview
Parts & Options